Application
Chemicals for electronics, PCB and semiconductors
High-purity acids, etchants, cleaning solvents, photoresist solvents and specialty metals for electronics assembly, display and semiconductor work.
Products used in electronics, PCB and semiconductors
1,393–1,416 of 2,154 products
Poly(3-hexylthiophene-2,5-diyl) electronic grade, 99.995% trace metals basis, average Mn 15,000-45,000
- CAS
- 104934-50-1
- Formula
- (C10H14S)n
- MW
- 15000 g/mol
ZX-017892
Poly(3-octylthiophene-2,5-diyl), electronic grade, 99.995%
- CAS
- 104934-51-2
- Formula
- C14H27NS
- MW
- 241.44 g/mol
ZX-017893
Poly(acrylic acid, sodium salt) solution, average Mw ~1,200, 45 wt.% in H2O
- CAS
- 9003-04-7
- Formula
- [CH2CH(CO2Na)]n
ZX-017444
Poly(acrylic acid, sodium salt) solution, average Mw ~15,000, 35 wt.% in H2O
- CAS
- 9003-04-7
- Formula
- [CH2CH(CO2Na)]n
ZX-017445
Poly(acrylic acid, sodium salt) solution, average Mw ~8,000, 45 wt.% in H2O
- CAS
- 9003-04-7
- Formula
- [CH2CH(CO2Na)]n
ZX-017446
Poly(acrylic acid) solution, average Mw ~2,000, 50 wt. % in H2O, electronic grade
- CAS
- 9003-01-4
- Formula
- (C3H4O2)n
ZX-017897
Poly(dimethylsiloxane), hydroxy terminated average Mn ~110,000, viscosity ~50,000 cSt
- CAS
- 70131-67-8
ZX-017447
Poly(dimethylsiloxane), hydroxy terminated average Mn ~550, viscosity ~25 cSt
- CAS
- 70131-67-8
- MW
- 550 g/mol
ZX-017448
Poly(ethylene glycol) methyl ether methacrylate, average Mn 500
- CAS
- 26915-72-0
- Formula
- H2C=CCH3CO2(CH2CH2O)nCH3
ZX-017453
Poly(ethylene glycol) methyl ether methacrylate, average Mn 950
- CAS
- 26915-72-0
- Formula
- H2C=CCH3CO2(CH2CH2O)nCH3
ZX-017454
Questions
Buying for electronics, PCB and semiconductors
What container types do high-purity acids ship in?
Electronic grade acids are filled into pre-cleaned HDPE or PFA bottles and drums so the container does not leach metals into the product. Bottle size and closure type affect cleanliness, so state your preferred pack when you request a quote.
Can I get a lot-specific trace metal report?
Yes. For electronic grade material the COA reports measured values for each specified element, usually by ICP-MS, rather than a generic statement of compliance. Ask for the full element list if your process is sensitive to a metal that is not routinely reported.
Do you supply sputtering targets or only chemicals?
Our focus is chemicals and high-purity metals in powder, granule or ingot form. Indium tin oxide and some metals can be supplied as powders or pieces for target fabrication. Finished bonded targets are quoted on request through specialist producers.
Other applications
Pharmaceutical Manufacturing and QCAgrochemicals and Crop ProtectionWater and Wastewater TreatmentPaints, Coatings and InksTextiles, Dyes and LeatherFood, Beverage and NutritionCosmetics and Personal CareResearch Labs and UniversitiesOil, Gas and PetrochemicalsPolymers, Plastics and RubberBatteries and Energy StorageMining, Mineral Processing and MetallurgyDiagnostics, Life Science and Biotech