Application

Chemicals for batteries and energy storage

Q: What is the difference between technical and battery grade lithium carbonate?

Battery grade typically requires at least 99.5 percent Li2CO3 with tight limits on sodium, calcium, magnesium, iron and sulfate. Technical grade is cheaper but suits glass, ceramics and greases rather than cathode synthesis. The COA shows which limits were tested.

Q: Can NMP be supplied with low water content?

Yes. Electronic and battery grades of NMP are offered with water typically below a few hundred ppm and low metal content. Because NMP is hygroscopic, keep containers sealed and consider smaller packs if usage is slow.

Q: Is lead oxide restricted for shipping?

Lead compounds are classed as toxic and environmentally hazardous, and some countries require import permits. They ship in sealed drums with full dangerous goods documentation. We confirm destination requirements at the quotation stage.

Lithium salts, cathode precursors, electrolyte solvents and salts, binders, graphite and lead compounds for cell R&D and production.

503 mapped products Typical chemicals

Products used in batteries and energy storage

25–48 of 503 products

1-Butyl-1-methylpiperidinium hexafluorophosphate, 99%

CAS: 1257647-66-7
Formula: C₁₀H₂₂F₆NP
MW: 301.25 g/mol

ZX-001425

1-Butyl-1-methylpiperidinium tetrafluoroborate, 99%

CAS: 886439-34-5
Formula: C₁₀H₂₂BF₄N
MW: 243.1 g/mol

ZX-001426

1-Butyl-1-methylpyrrolidinium bis(trifluoromethylsulphonyl)imide, 98.5%

CAS: 223437-11-4
Formula: C₁₁H₂₀F₆N₂O₄S₂
MW: 422.4 g/mol

ZX-001428

1-Butyl-1-methylpyrrolidinium bis(trifluoromethylsulphonyl)imide, 98%

CAS: 223437-11-4
Formula: C₁₁H₂₀F₆N₂O₄S₂
MW: 422.4 g/mol

ZX-001427

1-Butyl-1-methylpyrrolidinium bromide, ≥99%

CAS: 93457-69-3
Formula: C₉H₂₀BrN
MW: 222.17 g/mol

ZX-001429

1-Butyl-1-methylpyrrolidinium chloride, 99%

CAS: 479500-35-1
Formula: C₉H₂₀ClN
MW: 177.71 g/mol

ZX-001430

1-Butyl-1-methylpyrrolidinium dicyanamide, ≥97%

CAS: 370865-80-8
Formula: C₁₁H₂₀N₄
MW: 208.3 g/mol

ZX-001431

1-Butyl-1-methylpyrrolidinium hexafluorophosphate, ≥97.5% (T)

CAS: 330671-29-9
Formula: C₉H₂₀F₆NP
MW: 287.23 g/mol

ZX-001432

1-Butyl-1-methylpyrrolidinium iodide, ≥98%

CAS: 56511-17-2
Formula: C₉H₂₀IN
MW: 269.17 g/mol

ZX-001433

1-Butyl-1-methylpyrrolidinium methyl carbonate solution ~50% in methanol: water (2:3)

CAS: 1223496-96-5
Formula: C₁₁H₂₃NO₃
MW: 217.31 g/mol

ZX-001434

1-Butyl-1-methylpyrrolidinium tetrafluoroborate, ≥97% (T)

CAS: 345984-11-4
Formula: C₉H₂₀BF₄N
MW: 229.07 g/mol

ZX-001435

1-Butyl-1-methylpyrrolidinium trifluoromethanesulphonate, 95%

CAS: 367522-96-1
Formula: C₁₀H₂₀F₃NO₃S
MW: 291.33 g/mol

ZX-001436

1-Butyl-2,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide, ≥99%, H2O <500 ppm

CAS: 350493-08-2
Formula: C₁₁H₁₇F₆N₃O₄S₂
MW: 433.4 g/mol

ZX-001437

1-Butyl-2,3-dimethylimidazolium chloride, ≥97%

CAS: 98892-75-2
Formula: C₉H₁₇ClN₂
MW: 188.7 g/mol

ZX-001438

1-Butyl-2,3-dimethylimidazolium hexafluorophosphate, ≥97% (HPLC)

CAS: 227617-70-1
Formula: C₉H₁₇F₆N₂P
MW: 298.21 g/mol

ZX-001439

1-Butyl-2,3-dimethylimidazolium tetrafluoroborate, 97%

CAS: 402846-78-0
Formula: C₉H₁₇BF₄N₂
MW: 240.05 g/mol

ZX-001440

1-Butyl-2,3-dimethylimidazolium tetrafluoroborate, for electrochemistry, ≥99% (HPLC)

CAS: 402846-78-0
Formula: C₉H₁₇BF₄N₂
MW: 240.05 g/mol

ZX-001441

1-Butyl-3-methyalimidazolium dibutyl phosphate, ≥96% (HPLC)

CAS: 663199-28-8
Formula: C₁₆H₃₃N₂O₄P
MW: 348.42 g/mol

ZX-001442

1-Butyl-3-methylimidazolium acetate, ≥96% (HPLC)

CAS: 284049-75-8
Formula: C₁₀H₁₈N₂O₂
MW: 198.26 g/mol

ZX-001444

1-Butyl-3-methylimidazolium acetate, 95%

CAS: 284049-75-8
Formula: C₁₀H₁₈N₂O₂
MW: 198.26 g/mol

ZX-001443

1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, for HPLC 99%

CAS: 174899-83-3
Formula: C₁₀H₁₅F₆N₃O₄S₂
MW: 419.4 g/mol

ZX-001445

1-Butyl-3-methylimidazolium bis(trifluoromethylsulphonyl)imide, ≥98%

CAS: 174899-83-3
Formula: C₁₀H₁₅F₆N₃O₄S₂
MW: 419.4 g/mol

ZX-001446

1-Butyl-3-methylimidazolium bromide, ≥97% (HPLC)

CAS: 85100-77-2
Formula: C₈H₁₇BrN₂
MW: 221.14 g/mol

ZX-001447

1-Butyl-3-methylimidazolium bromide, ≥98.5% (HPLC)

CAS: 85100-77-2
Formula: C₈H₁₇BrN₂
MW: 221.14 g/mol

ZX-001448

Questions

Buying for batteries and energy storage

What is the difference between technical and battery grade lithium carbonate?

Battery grade typically requires at least 99.5 percent Li2CO3 with tight limits on sodium, calcium, magnesium, iron and sulfate. Technical grade is cheaper but suits glass, ceramics and greases rather than cathode synthesis. The COA shows which limits were tested.

Can NMP be supplied with low water content?

Yes. Electronic and battery grades of NMP are offered with water typically below a few hundred ppm and low metal content. Because NMP is hygroscopic, keep containers sealed and consider smaller packs if usage is slow.

Is lead oxide restricted for shipping?

Lead compounds are classed as toxic and environmentally hazardous, and some countries require import permits. They ship in sealed drums with full dangerous goods documentation. We confirm destination requirements at the quotation stage.

Other applications

Pharmaceutical Manufacturing and QC Agrochemicals and Crop Protection Water and Wastewater Treatment Paints, Coatings and Inks Textiles, Dyes and Leather Food, Beverage and Nutrition Cosmetics and Personal Care Electronics, PCB and Semiconductors Research Labs and Universities Oil, Gas and Petrochemicals Polymers, Plastics and Rubber Mining, Mineral Processing and Metallurgy Diagnostics, Life Science and Biotech