Application

Chemicals for electronics, PCB and semiconductors

Q: What container types do high-purity acids ship in?

Electronic grade acids are filled into pre-cleaned HDPE or PFA bottles and drums so the container does not leach metals into the product. Bottle size and closure type affect cleanliness, so state your preferred pack when you request a quote.

Q: Can I get a lot-specific trace metal report?

Yes. For electronic grade material the COA reports measured values for each specified element, usually by ICP-MS, rather than a generic statement of compliance. Ask for the full element list if your process is sensitive to a metal that is not routinely reported.

Q: Do you supply sputtering targets or only chemicals?

Our focus is chemicals and high-purity metals in powder, granule or ingot form. Indium tin oxide and some metals can be supplied as powders or pieces for target fabrication. Finished bonded targets are quoted on request through specialist producers.

High-purity acids, etchants, cleaning solvents, photoresist solvents and specialty metals for electronics assembly, display and semiconductor work.

2,154 mapped products Typical chemicals

Products used in electronics, PCB and semiconductors

1,561–1,584 of 2,154 products

Scandium oxide, 99.999%

CAS: 12060-08-1
Formula: O₃Sc₂
MW: 137.91 g/mol

ZX-014583

Scandium oxide, GR 99.99%

CAS: 12060-08-1
Formula: O₃Sc₂
MW: 137.91 g/mol

ZX-014584

Scandium sputtering target, diam. x thickness 14 inch x 0.25 inch, 99.99%

CAS: 7440-20-2
Formula: Sc
MW: 44.96 g/mol

ZX-016276

Scandium sputtering target, diam. x thickness 164 mm x 6 mm, 99.99%

CAS: 7440-20-2
Formula: Sc
MW: 44.96 g/mol

ZX-016277

Scandium sputtering target, diam. x thickness 2 inch x 0.125 inch, 99.995%

CAS: 7440-20-2
Formula: Sc
MW: 44.96 g/mol

ZX-016278

Scandium sputtering target, diam. x thickness 2 inch x 0.25 inch, 99.99%

CAS: 7440-20-2
Formula: Sc
MW: 44.96 g/mol

ZX-016279

Scandium sputtering target, diam. x thickness 3 inch x 0.125 inch, 99.99%

CAS: 7440-20-2
Formula: Sc
MW: 44.96 g/mol

ZX-016280

Scandium sputtering target, diam. x thickness 3 inch x 0.25 inch, 99.99%

CAS: 7440-20-2
Formula: Sc
MW: 44.96 g/mol

ZX-016281

Scandium Sulphate

CAS: 52788-54-2
Formula: H₁₆O₂₀S₃Sc₂
MW: 522.2 g/mol

ZX-019443

Secoisolariciresinol diglucoside

CAS: 158932-33-3
Formula: C₃₂H₄₆O₁₆
MW: 686.7 g/mol

ZX-042485

Shearing Interferometers

ZX-017037

Short multiwalled carbon nanotubes, 95% [COOH Functionalized] (OD: < 8 nm, ID: 2-5 nm, Length: 0.5-2 um)

CAS: 7440-44-0
Formula: C
MW: 12.01 g/mol

ZX-016843

Short multiwalled carbon nanotubes, 95% [COOH Functionalized] (OD: 10-20 nm, ID: 5-10 nm, Length: 0.5-2 um)

CAS: 7440-44-0
Formula: C
MW: 12.01 g/mol

ZX-016841

Short multiwalled carbon nanotubes, 95% [COOH Functionalized] (OD: 8-15 nm, ID: 3-5 nm, Length: 0.5-2 um)

CAS: 7440-44-0
Formula: C
MW: 12.01 g/mol

ZX-016842

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: < 8 nm, ID: 2-5 nm, Length: 0.5-2 um)

CAS: 308068-56-6
Formula: C
MW: 12.01 g/mol

ZX-016852

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 10-20 nm, ID: 5-10 nm, Length: 0.5-2 um)

CAS: 308068-56-6
Formula: C
MW: 12.01 g/mol

ZX-016844

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 20-30 nm, ID: 5-10 nm, Length: 0.5-2 um)

CAS: 7440-44-0
Formula: C
MW: 12.01 g/mol

ZX-016845

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 20-30 nm, ID: 5-10 nm, Length: 0.5-2 um)

CAS: 308068-56-6
Formula: C
MW: 12.01 g/mol

ZX-016846

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 30-50 nm, ID: 5-12 nm, Length: 0.5-2 um)

CAS: 7440-44-0
Formula: C
MW: 12.01 g/mol

ZX-016847

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 30-50 nm, ID: 5-12 nm, Length: 0.5-2 um)

CAS: 308068-56-6
Formula: C
MW: 12.01 g/mol

ZX-016848

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 50-80 nm, ID: 5-15 nm, Length: 0.5-2 um)

CAS: 7440-44-0
Formula: C
MW: 12.01 g/mol

ZX-016849

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 50-80 nm, ID: 5-15 nm, Length: 0.5-2 um)

CAS: 308068-56-6
Formula: C
MW: 12.01 g/mol

ZX-016850

Short multiwalled carbon nanotubes, 95% [OH Functionalized] (OD: 8-15 nm, ID: 3-5 nm, Length: 0.5-2 um)

CAS: 308068-56-6
Formula: C
MW: 12.01 g/mol

ZX-016851

SI wafers, P-type, dia 4 inch, thick 0.525 mm [Thermal oxide wafer 300 nm SiO2 layer on Si (100)]

ZX-017148

Questions

Buying for electronics, PCB and semiconductors

What container types do high-purity acids ship in?

Electronic grade acids are filled into pre-cleaned HDPE or PFA bottles and drums so the container does not leach metals into the product. Bottle size and closure type affect cleanliness, so state your preferred pack when you request a quote.

Can I get a lot-specific trace metal report?

Yes. For electronic grade material the COA reports measured values for each specified element, usually by ICP-MS, rather than a generic statement of compliance. Ask for the full element list if your process is sensitive to a metal that is not routinely reported.

Do you supply sputtering targets or only chemicals?

Our focus is chemicals and high-purity metals in powder, granule or ingot form. Indium tin oxide and some metals can be supplied as powders or pieces for target fabrication. Finished bonded targets are quoted on request through specialist producers.

Other applications

Pharmaceutical Manufacturing and QC Agrochemicals and Crop Protection Water and Wastewater Treatment Paints, Coatings and Inks Textiles, Dyes and Leather Food, Beverage and Nutrition Cosmetics and Personal Care Research Labs and Universities Oil, Gas and Petrochemicals Polymers, Plastics and Rubber Batteries and Energy Storage Mining, Mineral Processing and Metallurgy Diagnostics, Life Science and Biotech