Methyltrioctylammonium thiosalicylate, ≥95% (C)
- CAS
- 1027004-61-0
- Formula
- C32H59NO2S
- MW
- 521.9 g/mol
ZX-001578
Application
Chemicals for batteries and energy storage
Lithium salts, cathode precursors, electrolyte solvents and salts, binders, graphite and lead compounds for cell R&D and production.
Products used in batteries and energy storage
313–336 of 503 products
Multi Walled Carbon Nanotubes 88%+ (OD: 50-80 nm, ID: 5-15 nm, Length: 10-20 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016760
Multi Walled Carbon Nanotubes 88+% (OD: 20-40 nm, ID: 5-10 nm, Length: 10-30 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016761
Multi Walled Carbon Nanotubes, >95% (OD: 30-80 nm, ID: 5-15 nm, Length: <10μm)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016763
Multi Walled Carbon Nanotubes, 88+% (OD: 10-30 nm, ID: 5-10 nm, Length: 10-30 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016762
Multi-walled carbon nanotubes, 90%+ (OD: 10-30 nm, ID: 3-10 nm, Length: 1-10 µm)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016764
Multi-walled carbon nanotubes, 95% (OD: 10-20 nm, ID: 5-10 nm, Length: 0.5-2 ¼m)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016765
Multi-walled carbon nanotubes, 95% (OD: 10-20 nm, ID: 5-10 nm, Length: 10-30 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016766
Multi-walled carbon nanotubes, 95% (OD: 10-30 nm, ID: 5-10 nm, Length: 1-2 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016767
Multi-walled carbon nanotubes, 95% (OD: 10-30 nm, ID: 5-10 nm, Length: 5-15 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016768
Multi-walled carbon nanotubes, 95% (OD: 20-30 nm, ID: 5-10 nm, Length: 0.5-2 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016769
Multi-walled carbon nanotubes, 95% (OD: 20-30 nm, ID: 5-10 nm, Length: 10-30 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016770
Multi-walled carbon nanotubes, 95% (OD: 20-40 nm, ID: 5-10 nm, Length: 1-2 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016771
Multi-walled carbon nanotubes, 95% (OD: 20-40 nm, ID: 5-10 nm, Length: 5-15 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016772
Multi-walled carbon nanotubes, 95% (OD: 30-50 nm, ID: 5-15 nm, Length: 0.5-2 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016773
Multi-walled carbon nanotubes, 95% (OD: 30-50 nm, ID: 5-15 nm, Length: 10-20 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016774
Multi-walled carbon nanotubes, 95% (OD: 40-60 nm, ID: 5-10 nm, Length: 5-15 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016775
Multi-walled carbon nanotubes, 95% (OD: 40-60 nm, Length: 1-2 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016776
Multi-walled carbon nanotubes, 95% (OD: 50-80 nm, ID: 5-15 nm, Length: 0.5-2 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016777
Multi-walled carbon nanotubes, 95% (OD: 50-80 nm, ID: 5-15 nm, Length: 10-20 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016778
Multi-walled carbon nanotubes, 95% (OD: 60-100 nm, ID: 5-10 nm, Length: 5-15 um)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016779
Multi-walled carbon nanotubes, 95% (OD: 8-15 nm, ID: 3-5 nm, Length: 0.5-2 ¼m)
- CAS
- 7440-44-0
- Formula
- C
- MW
- 12.01 g/mol
ZX-016780
Questions
Buying for batteries and energy storage
What is the difference between technical and battery grade lithium carbonate?
Battery grade typically requires at least 99.5 percent Li2CO3 with tight limits on sodium, calcium, magnesium, iron and sulfate. Technical grade is cheaper but suits glass, ceramics and greases rather than cathode synthesis. The COA shows which limits were tested.
Can NMP be supplied with low water content?
Yes. Electronic and battery grades of NMP are offered with water typically below a few hundred ppm and low metal content. Because NMP is hygroscopic, keep containers sealed and consider smaller packs if usage is slow.
Is lead oxide restricted for shipping?
Lead compounds are classed as toxic and environmentally hazardous, and some countries require import permits. They ship in sealed drums with full dangerous goods documentation. We confirm destination requirements at the quotation stage.
Other applications
Pharmaceutical Manufacturing and QCAgrochemicals and Crop ProtectionWater and Wastewater TreatmentPaints, Coatings and InksTextiles, Dyes and LeatherFood, Beverage and NutritionCosmetics and Personal CareElectronics, PCB and SemiconductorsResearch Labs and UniversitiesOil, Gas and PetrochemicalsPolymers, Plastics and RubberMining, Mineral Processing and MetallurgyDiagnostics, Life Science and Biotech