Tantalum pentoxide sputtering target, diam. x thickness 304.8 mm x 10 mm, 99.99% elastomer bonding to Copper backing plate 304.8mm dia x 16 mm thick
- CAS
- 1314-61-0
- Formula
- O5Ta2
- MW
- 441.89 g/mol
ZX-016302
Saudi Arabia · Inorganics & Metals
Saudi Arabia Sample products
Inorganics & Metals shipped to Saudi Arabia
Zemixal supplies 5,293 products from its inorganics & metals range to buyers in Saudi Arabia. Demand there comes mainly from petrochemicals, refining and fertilisers & mining (phosphate, aluminium). Regular consignments go to industrial centres such as Jubail Industrial City, Yanbu Industrial City and Riyadh (Sudair & industrial cities). Typical customers for this division are battery and energy-storage developers, electronics and semiconductor materials teams and glass, ceramics and pigment producers.
Saudi Arabia Sample products5,293products in this division
6–12 dsea transit from India
2–4 dair freight
6categories
Supplying inorganics & metals to Saudi Arabia
By sea, containers and LCL lots take roughly 6–12 days to Dammam (King Abdulaziz Port) and Jeddah Islamic Port. Air cargo to Riyadh (RUH) takes 2–4 days, which suits small and urgent packs. The relevant authority is NCEC (National Center for Environmental Compliance) / SASO. Our export desk lines up the COA, GHS SDS and shipping documents to match. Common grades for this division are Technical / industrial, AR / ACS, 99.9% (3N) and 99.99% (4N) and higher.
Grades in this division
Technical / industrialAR / ACS99.9% (3N)99.99% (4N) and higherTrace-metals basisNano / specified particle sizeBattery grade (on specification)
Chemical compliance in Saudi Arabia
| Authority | NCEC (National Center for Environmental Compliance) / SASO |
|---|---|
| Seaports | Dammam (King Abdulaziz Port), Jeddah Islamic Port, Jubail Commercial Port |
| Airports | Riyadh (RUH), Jeddah (JED) |
| Dangerous goods | IMDG by sea, IATA DGR by air |
Controlled and hazardous chemicals usually need import clearance from the NCEC, which applies the Kingdom's chemical approval framework under GCC rules. Many products also require a SABER Certificate of Conformity and shipment certificate under SASO technical regulations, so check the HS code before you order. APIs and medicinal ingredients are regulated by the SFDA, which may ask for GMP evidence and product registration from the manufacturer. Dangerous goods must meet IMDG or IATA packing and declaration rules. India and Saudi Arabia have no trade agreement in force, so standard duties apply.
From order to delivery
- 1–2 daysQuote and document set agreed
Price, pack sizes, Incoterm and the paperwork list are confirmed in writing.
- 3–7 daysPacking for export
Stock items are packed in UN-rated drums or cartons. Made-to-order material adds its own lead time.
- 1–3 daysExport clearance at Nhava Sheva or Mundra
Shipping bill filed, dangerous goods declared under IMDG where needed.
- 6–12 daysOcean transit to Dammam (King Abdulaziz Port)
Port-to-port time depends on the vessel schedule and any transhipment.
- 2–5 daysImport clearance
Your broker clears the goods against local rules. Chemical oversight: NCEC (National Center for Environmental Compliance) / SASO.
Indicative total by sea: 13–29 days
By air: about 6–14 days in total.
Documents for Saudi Arabia
- Commercial Invoice
- Packing List
- Bill of Lading / Air Waybill
- Certificate of Origin
- Certificate of Analysis (COA)
- Safety Data Sheet (16-section GHS)
- SASO/SABER certificate where applicable
- NCEC chemical import clearance for controlled substances
- SFDA import approval / registration for APIs where applicable
- Dangerous Goods Declaration (IMDG/IATA) where applicable
A selection we ship to Saudi Arabia
A rotating sample from the division. Every product in the catalogue can be quoted for this destination.
Tantalum sputtering target, 99.95% (L x W x Thick 700 x 25.4 x 3 mm)
- CAS
- 7440-25-7
- Formula
- Ta
- MW
- 180.95 g/mol
ZX-016304
Tantalum sputtering target, diam. x thickness 2 inch × 0.250 inch, 99.95%
- CAS
- 7440-25-7
- Formula
- Ta
- MW
- 180.95 g/mol
ZX-016305
Tantalum sputtering target, diam. x thickness 25.4 mm x 1 mm, 99.9%
- CAS
- 7440-25-7
- Formula
- Ta
- MW
- 180.95 g/mol
ZX-016306
Tantalum sputtering target, diam. x thickness 3 inch x 2.5 mm, 99.95%
- CAS
- 7440-25-7
- Formula
- Ta
- MW
- 180.95 g/mol
ZX-016307
Tantalum sputtering target, diam. × thickness 2 inch × 3 mm, 99.9%
- CAS
- 7440-25-7
- Formula
- Ta
- MW
- 180.95 g/mol
ZX-016308
Tantalum, sputtering target, 99.95% (L x W x Thick 14 x 1 x 2 mm)
- CAS
- 7440-25-7
- Formula
- Ta
- MW
- 180.95 g/mol
ZX-016309
Tantalum, sputtering target, diam. x thickness 1 inch x 0.125 inch, 99.95%
- CAS
- 7440-25-7
- Formula
- Ta
- MW
- 180.95 g/mol
ZX-016310
Tin sputtering target, diam. x thickness 2 inch x 0.250 inch, 99.999%
- CAS
- 7440-31-5
- Formula
- Sn
- MW
- 118.71 g/mol
ZX-016314
Tin sputtering target, diam. x thickness 3 inch × 3 mm, 99.99%
- CAS
- 7440-31-5
- Formula
- Sn
- MW
- 118.71 g/mol
ZX-016315
Questions
Inorganics & Metals for Saudi Arabia
Do you ship inorganics & metals to Saudi Arabia?
Yes. We ship by sea to Dammam (King Abdulaziz Port) and Jeddah Islamic Port, by air cargo or by express courier depending on quantity and urgency. Every lot carries a COA and a 16-section GHS SDS.
Which documents come with a inorganics & metals shipment to Saudi Arabia?
Commercial invoice, packing list, certificate of analysis and SDS as standard, plus the bill of lading or air waybill and a certificate of origin. Anything specific to NCEC (National Center for Environmental Compliance) / SASO is agreed with you at quote stage.
How long does delivery to Saudi Arabia take?
Allow 6–12 days for ocean transit or 2–4 days by air, plus packing, export clearance and import clearance. The timeline on this page shows each stage.
What does 'trace metals basis' mean on an inorganic product?
It means the stated purity is calculated from the measured levels of metallic impurities, usually by ICP-MS or ICP-OES, rather than from a direct assay of the main component. Non-metallic impurities such as oxygen, carbon or moisture may not be included. Check the COA to see which elements were tested and their limits.
Can metals be cut or sized to my drawing?
Many foils, rods, plates and targets can be supplied in custom dimensions, thicknesses or diameters. Send a drawing or the key measurements with the tolerance you need. We will confirm feasibility, lead time and the purity available in that form before quoting, since some shapes are only made from certain grades.
Other divisions for Saudi Arabia
Lab Reagents Solvents (HPLC & GC) Biochemicals APIs Impurity Reference Standards Pharmaceutical Intermediates Specialty Chemicals
United Arab Emirates
Iraq
Israel
Jordan
Kuwait
Oman
Qatar
Bahrain
Lebanon